+1-888-597-3962 What to Do When your Printouts are Blotchy

It is not unheard of for high-performing machines to play up every once in a while. One example of this is laser Kodak printers. If a single component fails to perform the way it is supposed to, everything that follows can be a failure as well. While major problems are rare with laser Kodak Printer Support Phone Number, there are times when this can happen, mostly due to the lack of a toner.

One of the common Kodak printer problems in Windows is a blotchy printout. This means the page will have smudges of toner on it, which makes words hard to read. Following is how to troubleshoot the Kodak printer issue.

  • If it is a Leaking Cartridge
  • Switch off the Kodak printer and pull out the power cord.
  • Remove the toner cartridge.
  • Take a look at the Printer ads. If they are clogged, that may be causing the problem. Clean it with toner wipes,
  • cloth, or alcohol-soaked tissue.
  • Check how the toner cartridge is holding up. See if you can reuse it, or if you need to get a replacement.
  • Put a toner cartridge, old or new, into the Kodak printer.
  • Plug the Kodak printer in and power it on.
  • Do a test print.
  • If the Toner has Built Up on the Drum Unit
  • Laser Kodak Printers
  • Corona Wire Has Failed

Switch off the Kodak printer and pull out the power cord.

  • Take out the drum unit from the Kodak printer, and put this over a clean cloth to prevent a stain or spill.
  • When using a color laser Kodak printer, remove the blotchy printout so that you know which drum unit needs
  • cleaning. This will be evident from the color of the blotches.
  • Turn the drum unit around to figure out the spot where the toner has built up.
  • After you find this, clean the surface with a swab until you have removed the buildup.
  • Move the drum unit back into position, and put it back in the Kodak printer.
  • Plug the Kodak Printer Technical Support Phone Number in and power it on.
  • Do a test print.
  • If the Corona Wire has Failed
  • Switch off the Kodak printer and pull out the power cord.
  • Let the Kodak printer be for some time, so that the corona wire cools.
  • Take out the drum unit, and put it on a clean dry cloth.
  • Wipe clean the corona wire. For this, you just have to slide the blue tab to either side. Do not touch the wires while
  • you are doing this.
  • Push the blue tab into position.
  • Move the drum unit back into position, and put it back in the Kodak printer.
  • Plug the kodak printer in and power it on.
  • Do a test print to confirm that the Kodak printer issues is fixed.

 

If you look at our Lexmark Printer Technical Support Phone Number page, you can see an example of those Get a Free Quotes.

More info:- https://www.customersupportcare.com/kodak-printer-support.html

 

You May Also Like

About the Author: Anjilo Jilo

This article is written by Anjilo who is a passionate blogger and writer. She loves to write on Printer Customer Support, relocation and Printer Technical Support related topics. Currently she is rendering his services to customersupportcare.com which is an online Printer offline, Setup, Install Help Number +1-888-597-3962 get information, and free quotes of top rated professional Printer Customer Support.

Leave a Reply

Your email address will not be published. Required fields are marked *